AUSGABE AB 6DS1222-8BA Siemens Teleperm Bus Connection
|
||
|
Mfr. Part Number: |
6DS1222-8BA |
|
Manufacturer: |
Siemens |
|
Description: |
AUSGABE AB 6DS1222-8BA |
|
Full Description: |
·
Siemens
6DS1222-8BA N-AT Interface Module The N–AT local bus interface permits
the OS 525 to be connected to the 20–meter local bus of the CS 275 bus system. ·
The OS 525 software executes in
one of these computers and employs the computers connected to the terminal
bus as additional operator positions. The computer that contains the OS 525
software is known as the base unit (host computer). ·
The OS 525 software has been
installed on the hard disk of the host computer. The terminals connected
merely contain the OS terminal software. The OS terminal software consists of
the EASYS I/O system of the OS 525 software. ·
Process control data (on line
form, .OSO file) created by configuration and on line setting is not specific
to an operator position. This means that it does not possess any information
that is related to the device configuration used during process control. ·
All operator positions of each host work on
the same on line form. ·
The device configuration used in
process control is set in the OS–SET configuration tool (cf. Section 3.1.6.
in this Manual). ·
When process control starts, the
configured start screen is displayed at all configured and connected operator
positions. Afterwards, each operator position permits independent operator
input. ·
The measured–value and message
archives are updated when starting a redundant OS (cf. Section 3.3 in
SUPERVISOR C79000–G8076–C524). |
|
|
|
Condition: |
Used / Working |
|
Price: |
Sales.plcadvance@gmail.com |