ABB DO801, ABB CI801, ABB AI801
|
||
|
Mfr. Part Number: |
ABB DO801, ABB CI801, ABB AI801 |
|
Manufacturer: |
ABB |
|
Description: |
ABB DO801, ABB CI801, ABB AI801 |
|
Full Description: |
·
AI801:- The AI801
Analog Input Module has 8 channels for current input. The current input is
able to handle a short circuit to the transmitter supply at least 30 V d.c
without damage. ·
Current
limiting is performed with a PTC resistor. The input resistance of the
current input is 250 ohm, PTC included. ·
8 channels for
0...20 mA, 4...20 mA d.c., single ended unipolar inputs ·
1 group of 8
channels isolated from ground ·
12 Bit
resolution ·
Input
shunt resistors protected to 30 V by PTC resistor ·
Analog
inputs are short circuit secured to ZP or +24 V ·
The
input withstand HART communication ·
Process
and power connections via detachable connectors ·
Signal
specification:- 0...20 mA, 4...20 mA ·
Number
of channels:- 8 ·
Resolution
:- 12 bit ·
Input
impedance:- 230 - 275 kΩ (current input incl PTC) ·
Under/over
range:- 0% / +15% ·
Temperature
drift:- Typ. 50 ppm/°C, Max. 80 ppm/°C ·
Maximum
field cable length:- 600 meters (656 yards) ·
Max
input voltage (non destructive):- 30 V dc ·
NMRR,
50Hz, 60Hz:- >40dB ·
Rated
insulation voltage :- 50 V ·
Power
dissipation:- 1.1 W ·
Current
consumption +5 V Modulebus :- 70 mA ·
Dielectric
test voltage:- 500 V ac ·
Temperature
Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for
+5 to +55 °C ·
Temperature,
Storage :- -40 to +70 °C (-40 to +158 °F) ·
Relative
humidity:- 5 to 95 %, non-condensing ·
Max
ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C
(104 °F) ·
Protection
class :- IP20 ·
CI801 :- S800 I/O is a comprehensive, distributed and modular process I/O
system that communicates with parent controllers and PLCs over
industry-standard field buses. ·
The
CI801 Fieldbus Communication Interface (FCI) module is a configurable
communication interface that performs operations such as signal processing,
gathering of supervision information, OSP handling, Hot Configuration InRun,
HART pass-trough and configuration of I/O modules. ·
24
V consumption typ. :- 140 mA ·
Temperature,
Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5
to +55 °C ·
Temperature,
Storage :- -40 to +70 °C (-40 to +158 °F) ·
Relative
humidity:- 5 to 95 %, non-condensing ·
Max
ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C
(104 °F) ·
Protection
class :- IP20 ·
DO801:- The DO801 is a 16 channel 24 V digital output module for the S800 I/O.
·
The
output voltage range is 10 to 30 volt and the maximum continuous output
current is 0.5 A. ·
The
outputs are protected against short circuits, over voltage and over
temperature. ·
The
outputs are in one isolated group. Each output channel consists of a short
circuit and over temperature protected high side driver, EMC protection
components, inductive load suppression, output state indication LED and
optical isolation barrier. ·
Signal
specification:- 24 V d.c. (12 - 32 V d.c.), 0.5 A ·
Number
of channels :- 16 ·
Isolation
:- Groupwise isolated from ground ·
Output
load :- < 0.4 Ω ·
Maximum
field cable length:- 600 meters (656 yards) ·
Rated
insulation voltage :- 50 V ·
Dielectric
test voltage :- 500 V ac ·
Power
dissipation:- Typ.2.1 W ·
Current
consumption +5 V Modulebus :- 80 mA ·
Supported
wire size :- Solid: 0.05-2.5 mm², 30-12 AWG ·
Temperature,
Operating :- 0 to +55 °C (+32 to +131 °F), approvals are issued for +5
to +55 °C ·
Temperature,
Storage :- -40 to +70 °C (-40 to +158 °F) ·
Relative
humidity :- 5 to 95 %, non-condensing ·
Max
ambient temperature :- 55 °C (131 °F), for vertical mounting 40 °C
(104 °F) ·
Protection
class :- IP20 |
|
|
|
Condition: |
Used / Working |
|
Price: |
Sales.plcadvance@gmail.com |