ABB INSUM MCU2 Motor Control Unit MCU2A01C0-3 Rev A 1SCA022622R331
|
||
|
Mfr. Part Number: |
ABB INSUM MCU2 Motor Control Unit |
|
Manufacturer: |
ABB |
|
Description: |
ABB INSUM MCU2 Motor Control Unit |
|
Full Description: |
·
Motor Control
Unit (MCU) is a product range of electronic motor control and protection
devices with a fieldbus interface. ·
Typically MCU
is located into the motor starter, where it’s main task is protection,
control and monitoring of a 3-phase/1-phase AC motor and motor starter
equipment. ·
MCU is
connected to the other starter equipment via digital and analog I/O and to
other MCU and control system(s) via fieldbus interface. ·
MCU1 is a basic
low-end motor controller device for motor and starter equipment protection,
control and monitoring. ·
MCU2 is a high-end motor controller device
based on the MCU1. ·
MCU2 offers
more comprehensive set of motor and starter equipment protection, control and
monitoring functions. ·
Additionally
some process control related functions are included. ·
MCU1 has 12 and
MCU2 has 17 digital inputs of the type 10 mA / 24 VDC. ·
Digital input
is activated when connected to the corresponding common terminal. ·
Rated
operational voltage (Ue) :- 400/690 V ·
Rated
insulation voltage (Ui) :- 690 V AC ·
Rated impulse
withstand voltage (Uimp) :- 6 kV ·
Rated Frequency
:- 50/60 Hz ·
Frequency
Limits :- -5%...+3% ·
Rated
conditional short circuit current (Iq r.m.s.) :- 50 kA ·
Rated
operational voltage (Ue) :- 24 V DC or 230 V AC ·
Rated
operational voltage (Ue) :- 24 V DC ·
Voltage
operation range :- +19…+33 V DC ·
Minimum measured
resistance :- 50 Ω ·
Maximum
measured resistance :- 15 kΩ ·
Output voltage
:- 14.0 – 25 VDC ·
Output current
(short circuit protected) :- 20…32 mA ·
Rated
operational current :- 0.5 A ·
Ambient
temperature range Storage :- -25…+85C ·
Normal
operation :- -5….+55C ·
Protection
Class :- IP20 |
|
Condition: |
Used / Working |
|
Price: |
Sales.plcadvance@gmail.com |