Johnson Controls Metasys NCE Network Control MS-NCE2520-0 Rev. E Ver 4.0
|
||
|
Mfr. Part Number: |
MS-NCE2520-0 |
|
Manufacturer: |
Johnson Controls |
|
Description: |
Metasys NCE Network Control MS-NCE2520-0 |
|
Full Description: |
·
Supports one
LONWORKS trunk with up to 32 LONWORKS devices ·
Dedicated
nominal 24 VAC, Class 2 power supply (North America),SELV power supply
(Europe), at 50/60 Hz (20 VAC minimum to 30 VAC maximum) ·
Power Consumption:-
25 VA maximum for NCE25 only ·
Ambient
Operating Conditions:- 0 to 50°C (32
to 122°F), 10 to 90% RH, 30°C (86°F) maximum dew point ·
Ambient Storage
Conditions:- -40 to 70°C (-40 to
158°F), 5 to 95% RH, 30°C (86°F) maximum dew point ·
Analog
Input/Analog Output :- Analog Input Points: 16-bit resolution ·
Mounting :- On
flat surface with screws on three mounting clips or a single 35 mm DIN rail ·
Power
Source :- +15 VDC power source terminals provide 100 mA total current;
quantity of inputs: five, located in Universal IN terminals; for active
(3-wire) input devices ·
Supervisory Controller: 192 MHz Renesas SH4 7760 RISC processor ·
Field Controller: 20 MHz Renesas H8S2398 processor ·
Data
Protection Battery :- Supports data protection on power failure.
Rechargeable NiMH battery: 3.6 VDC 500 mAh, with a typical life of 5 to 7
years at 21°C (70°F); Product Code Number: MS-BAT1020-0 ·
Analog
Input/Analog Output :- Analog
Input Points: 16-bit resolution ·
Operating
System :- Microsoft Windows
Embedded CE 6.0 (Release 9.0) Buildroot 2017.08.2 with Linux kernel 4.14 (Release
9.0.7 or
later patch) ·
Input/Output
Capabilities :- 10-Universal
Inputs: Defined as 0–10 VDC, 4–20mA, 0–600k ohm, or Binary Dry Contact
|
|
|
|
Condition: |
Used / Working |
|
Price: |
Sales.plcadvance@gmail.com |