Phoenix Contact MCR-C-UI-UI-DC
Mfr.
Part Number
:- Phoenix Contact MCR-C-UI-UI-DC
Manufacturer
:- Phoenix Contact
Description :-
Phoenix Contact MCR-C-UI-UI-DC
Full
Description :- MCR 3-way signal conditioner, with configurable input/output,
for the electrical isolation of analog signals, preconfigured.
The 3-way isolation means that the
modules can be used universally, both on site or in the vicinity of the
controller for signal conversion and electrical isolation, and along the
transmission path to bridge high load resistance values.
Signals are converted by means of
an inductive transmission method. In addition, a filter connected downstream of
the transmitter reduces possible interference.
Alignment span :- ± 2 %
Limit
Frequency (3 dB) :- 30 Hz
Maximum Power
Dissipation for nominal Condition :- 900 mW
Test voltage input/output :- 1.5 kV AC (50 Hz, 60 s)
Step response (10-90%) :- 11 ms
Maximum temperature coefficient :- 0.0075 %/K
Supply voltage range :- 18 V DC…30 V DC
Max. current consumption :- < 30 mA (without load)
Voltage input signal :- 0 V ... 10 V (please indicate if different setting when
ordering)
Max. voltage input signal :- 30 V
Max. current input signal :- 50 mA
Input resistance current input :- 50 Ω
Supply Voltage :- 24 V DC
Max. voltage output signal :- 15 V
Max. Current Output Signal :- 30 mA
Load/output load voltage output :- ≥ 10 kΩ
Load/output load current output :- ≤ 500 Ω
Stripping length :- 8 mm
Screw thread :- M3
Conductor cross section rigid :- 0.2 mm² ... 2.5 mm²
Conductor cross section AWG :- 24…14
Ambient temperature (operation) :- -20 °C ... 65 °C
Mounting type :- DIN Rail Mount
Condition :- Used /
Working
Price :- Sales.plcadvance@gmail.com