BENDER IREH150P INSULATION MONITORING DEVICE
Mfr.
Part Number :- BENDER
IREH150P INSULATION MONITORING
Manufacturer :- Bender
Description :- BENDER
IREH150P INSULATION MONITORING
Full Description :- The A-ISOMETER®s
IREH150 and IREH150P are used for off-line monitoring of earthed and unearthed
single and three phase AC networks up to 660 V and DC networks up to 500 V. The
connecting leads of idle consumers, e.g. motors, are monitored continuously.
The offline monitor
detects insulation faults. Two output contacts can be used for signalling or
motor restart interlocking.
The devices require a supply voltage of AV ...
Hz 230 V. Other values on request.
To obtain that
monitoring is performed only in idle condition, the control voltage of the
contactor coil is measured at the contactor for the respective load.
If voltage is present, the monitoring will be
suppressed. Only in case of no voltage, the consumer including the wiring will
be monitored.
The control voltage of
the contractor coil can be AV 24...380 V or DC 24...500 V.
Nominal insulation
voltage :- AC 660 V
Dielectric test :- 2500
V
Operation class :- permanent
operation
Control voltage of the
contactor coil UF :- AC 50...60 Hz 24...380 V / DC 24 ...500 V
Supply voltage US :- AC
50...60 Hz 230 V
Switching capacity max.
:- 1100 VA
Rated contact voltage :-
230 V
Ambient temperature,
during operation :- -10°C...+60°C
Storage temperature
range :- -20°C...+60°C
Condition :- Used / Working
Price :- Sales.plcadvance@gmail.com