GE Fanuc IC693CPU374-GS CPU With 240K User MEM W/Ethernet Comm
Mfr.
Part Number
:-
GE Fanuc IC693CPU374-GS CPU With 240K User
Manufacturer
:- GE Fanuc
Description :-
GE Fanuc IC693CPU374-GS CPU With
240K User
Full
Description :-
The GE Fanuc IC693CPU374 is a Series 90-30 Processor module.
This module is a CPU 374
module with single slot width, processor speed of 133 MHz with typical scan
rate of 0.15 ms per 1K of logic for Boolean contacts.
It has an embedded user memory of 240KB with Two (2) Ethernet communication ports.
This module is operated
within the ambient temperature range of 0°C to 60°C. The temperature required
for the storage is in between -40° C and +85°C.
The total user memory used by the
IC693CPU374 is 240 KB. The actual size associated with program memory for the
user primarily depends on the configured memory types, such as Register memory
(%R), Analog input (%AI) and Analog output (%AO). The amount of memory
configured for each of these memory types is 128 to around 32,640 words.
The power required for the IC693CPU374 is 7.4 watts from 5V
DC voltage. It also supports a RS-485 port when the power is supplied. The
protocol SNP and SNPX are supported by this module when the power is supplied
through this port.
Processor Speed :- 133
MHZ
Execution Time (Boolean
Operation) :- 0.15 msec per Boolean instruction
Product
Type :- Single-slot CPU with
Ethernet controller
User Memory (total)
:- 240KB (245,760) Bytes
Speed
:- 10/100 Mbps
Temperature:- 0-60 degrees Celsius
Power Rating :- 7.4 Watts
System Registers :- 28
Voltage :- 5
Volts DC
Condition :- Used / Working
Price :- Sales.plcadvance@gmail.com