GE Fanuc IC693MDL753G Output 12/24vdc 0.5A 32PT POS
Mfr.
Part Number
:-
GE Fanuc IC693MDL753G Output
Manufacturer
:- GE Fanuc
Description :-
GE Fanuc IC693MDL753G Output
Full
Description :-
The GE
Fanuc IC693MDL753 is 12/24 volt DC, 0.5A Positive Logic Output module.
Designed
for the Series 90-30 Programmable Logic Controller, this output module is
equipped with 32
discrete outputs.
These
outputs have been set up in four separate isolated groups of eight. Each group
has its own dedicated common.
As they are sourcing type
outputs, they switch the loads on the positive side of the power supply to
supply current to the load.
The
outputs on this module are capable of switching loads from +12 through +24 VDC
(+20%, –15%).
They
can also source current to a maximum value of 0.5 amps per point. In the group
commons, there are user I/O connectors.
Each connector has two pins,
which can handle up to 3A current.
Rated Voltage:- 12 through 24 volts DC, positive logic
Output Voltage Range :- 10.2 to 28.8 volts DC
Outputs per Module :- 32 (four groups of eight outputs each)
Isolation :- 1500 volts between field side and logic side 250 volts between groups
Output Current :- 0.5 amps per point with 4 amps maximum per group and 3 amps maximum per group common pin
Inrush Current :- 5.4 amps for 10 ms
On-state Voltage Drop :- 0.3 volts DC
Off-state Leakage Current :- 0.1 mA maximum
On Response Time :- 0.5 ms maximum
Off Response Time :- 0.5 ms maximum
Internal Power Consumption :- 260 mA (maximum) from 5 volt bus on backplane; (13 mA + 3 mA/point ON + 4.7 mA/LED)
16.5 mA (maximum) per group from user supply @ 24 VDC and all eight outputs in group ON 9.6 mA (maximum) per group from user supply @ 12 VDC and all eight outputs in group ON
Condition :- Used
/ Working
Price :- Sales.plcadvance@gmail.com