Ge Fanuc IC697PWR711L Series 90-70 Power Supply
Mfr.
Part Number
:- Ge Fanuc IC697PWR711L Series 90-70
Manufacturer
:- GE Fanuc
Description :-
Ge Fanuc IC697PWR711L Series 90-70
Full Description :- The IC697PWR711 is a GE Fanuc manufactured 100 Watt
Power Supply Module for the Series 90-70.
Features
include operation from 120 VAC, 240 VAC, or 125 VDC, and there are three output
voltages (100 watts total) as follows: +5 VDC output up to 20 amps; +12 VDC
output up to 2 amps; -12 VDC output up to 1 amp.
Other
highlights include slide-in rack mount construction, electronic short circuit
overcurrent protection, two rack operation from a single power supply, power
factor correction for AC operation, and a jumper for overvoltage protection
devices.
This
power supply module can operate from 120 VAC or 240 VAC nominal inputs. A
nominal 125 VDC source is also an option.
The
specified range of operation is from 90 VAC to 264 VAC and from 100 VDC to 150
VDC. For uninterrupted operation (more than one hour) at low line voltages and
high temps, some power derating must be applied.
Nominal
Rated Voltage :- 120/240 VAC or 125 VDC
Input Voltage Range
:- 90 to 264 VAC or 100 to 150 VDC
Input Power :- 135 watts (Typical), 160 Watts (Maximum)
Input Half
Cycle Peak Inrush :- 3 amps (Typical)
Output Power:- 100 Watts
DC Output:- + 5VDC: 4.90 to
5.25 Volts (5.07 Volts nominal), +12 VDC:
11.75 to 12.6 Volts, -12 VDC: -12.6 to -11.75 Volts
Over Voltage Limit :- +5 VDC
Output: 5.7 to 6.7 Volts
Over Current Limit :- +5VDC Output:
21 A (Typical), +12 VDC Output: 3.5A(Typical), -12 VDC Output: 1.6A (Typical)
Operating Temperature :- 0˚C To 60˚C
(32˚F To 140˚F)
Storage Temperature :- -40˚C To +85˚C
(-40˚F To 185˚F)
Power Factory :- > 0.93
Condition :- Used / Working
Price :- Sales.plcadvance@gmail.com