GE Fanuc IC697CMM711Q Communications Coprocessor Module
Mfr.
Part Number
:- GE Fanuc IC697CMM711Q
Communications Coprocessor
Manufacturer
:- GE Fanuc
Description :-
GE Fanuc IC697CMM711Q
Communications Coprocessor
Full Description :- The IC697CMM711 is a Single-Slot
Communications Coprocessor Module (CMM) from the GE 90-30 series.
The module comes standard with soft switch configuration
(eliminating the need for switches and/or jumpers), three status LEDs,
pushbutton reset control, and two serial ports. The module uses a 12 Mhz,
80C186 microprocessor.
Additionally, no battery is needed.
The CMM is part of a family of communication modules and
demonstrates both communications control (CCM), remote terminal (RTU), and
general IC69 communications (SNP) functionality.
CCM, RTU and SNP are
available on either or both serial ports in any of nine possible
configurations: CCM/CCM, CCM/RTU, RTU/CCM, RTU/RTU, SNP/SNP, SNP/CCM, CCM/SNP,
SNP/RTU, and RTU/SNP.
The module delivers both the RS-232 and RS-485 interfaces
and communicates with the PLC CPU via the backplane.
Numerous CMMs can be placed in just one IC697 PLC system.
Functions allowed by the IC697CMM711 CMM in the CCM operation mode include read/write of
register, input and output tables, bit set/clear of inputs and outputs, read of
scratch pad, Q sequence commands for fast reads, and diagnostic status word
modification.
In master/peer CCM
configurations, the CMM initiates communications with remote devices through
application ladder program communications requests.
The IC697CMM711 module’s
status is viewable via three LEDs. Activity of the serial ports are identified
in port 1 LED and port 2 LED.
The top LED will blink when the module is powered up, and
once diagnostics are completed effectively, the top LED will remain lit. The
top LED will always identify module state.
12 Mhz, 80C186 Microprocessor
Single-Slot Module
Two RS-422/RS-485 or RS-232 Serial Ports
Three status LEDs
Simultaneous Communications on Both Ports (up to 9.6 Kbps,or
19.2 Kbps Individually)
SNP/SNPX Protocol (Master Slave)
Module Type
:- Communications Coprocessor
Number of Slots:-
One (Single Slot)
Protocols :- CCM, RTU,
SNP and SNPx
Connects to:- MS-DOS
or Windows programming
Current Required
:- 0.7amps
Condition :- Used
/ Working
Price :- Sales.plcadvance@gmail.com