|
||
|
Mfr. Part Number: |
ABB AI810 Analog input Module 3BSE008516Z1 |
|
Manufacturer: |
ABB |
|
Description: |
ABB AI810 Analog input Module 3BSE008516Z1 |
|
Full Description: |
· 3BSE008516Z1:- ·
The AI810
Analog Input Module has 8 channels. Each channel can be either a voltage or
current input. ·
The current
input is able to handle a short circuit to the transmitter supply at least 30
V d.c without damage. ·
Current
limiting is performed with a PTC resistor. The input resistance of the
current input is 250 ohm, PTC included. ·
The voltage
input is able to withstand an over or undervoltage of at least 30 V d.c. ·
8 channels for
0...20 mA, 4...20 mA, 0...10 V or 2...10 V d.c., single ended unipolar inputs ·
1 group of 8
channels isolated from ground ·
12 Bit
resolution ·
Input shunt
resistors protected to 30 V by PTC resistor ·
Analog inputs
are short circuit secured to ZP or +24 V ·
The input
withstand HART communication. ·
Input resistance is 290k ohm. Transmitter
supply can be connected to L1+, L1- and/or L2+, L2-. ·
0(4)..20mA, 0..10V, 12Bit,
single ended. ·
Input impedance :- 290 kΩ
(voltage input)
230 - 275 kΩ (current input) ·
Isolation :- Groupwise
isolated from ground ·
Under/over range :- -5% /
+15% ·
Resolution :- 12 bit ·
Temperature drift :- Voltage:
Typ. 70 ppm/°C Max. 100 ppm/°C; Current: Typ. 50 ppm/°C Max. 80 ppm/°C ·
Maximum field cable length:-
600 meters (656 yards) ·
Max input voltage (non
destructive) :- 30 V dc ·
NMRR, 50Hz, 60Hz :- >
40dB ·
Rated insulation voltage
:- 50 V ·
Dielectric test voltage :- 500 V ac ·
Power dissipation :- 1.5 W ·
Temperature, Operating :- 0
to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C ·
Temperature, Storage :- -40
to +70 °C (-40 to +158 °F) ·
Relative humidity :- 5 to
95 %, non-condensing ·
Max ambient temperature :-
55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F) ·
Protection class :- IP20 · ABB 3BSE013230R1 :- ·
The
TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for
the S800 I/O. ·
The MTU is a
passive unit used for connection of the field wiring to the I/O modules. ·
It also
contains a part of the ModuleBus. ·
The MTU
distributes the ModuleBus to the I/O module and to the next MTU. ·
It also
generates the correct address to the I/O module by shifting the outgoing
position signals to the next MTU. ·
Two mechanical
keys are used to configure the MTU for different types of I/O modules. ·
This is only a mechanical
configuration and it does not affect the functionality of the MTU or the I/O
module. Each key has six positions, which gives a total number of 36
different configurations. ·
Compact Module Termination Unit
2x8 signal terminals. ·
TU810V1 Compact MTU, 50V ·
Channels :- 16 ·
Voltage :- 50 V ·
Mounting detail :- Horizontal
55 ºC (131 °F) ·
Process connections :- 2 x
2 Process power, 5 x 2 Process power (0 V) ·
Dielectric test voltage :-
500 V ac ·
Acceptable wire sizes :- Solid:
0.2 - 4 mm² Stranded: 0.2 - 2.5 mm², 24 - 12 AWG ·
Temperature, Operating :- 0
to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C ·
Temperature, Storage :- -40
to + 70 °C (-40 to +158 °F) ·
Relative humidity :- 5 to
95 %, non-condensing ·
Max ambient temperature :-
55 °C (131 °F), for vertical mounting 40 °C (104 °F) ·
Protection class :- IP20 |
|
Condition: |
Used / Working |
|
Price: |
Sales.plcadvance@gmail.com |